Texas State Seal

CONTRACT PURCHASE ORDER

In accordance with the contract between the Contractor
and the Texas Comptroller of Public Accounts
         Agency to Invoice    
      TX DEPT OF TRANSPORTATION            60133     Purchase Order Number  3 0 3 0 9 6
      DIV OF FINANCE/VOUCHER PROCESS       001                 Requisition  60129-0-19200
      125 E. 11TH STREET
      AUSTIN             TX 78701                                           01/15/10         1


         Destination if Different  
      TX DEPT OF TRANSPORTATION            60129
      2400 N.E. LOOP 7                     007
      ATHENS TX 75752-5248

THE STATE OF TEXAS IS EXEMPT FROM ALL FEDERAL EXCISE TAXES
STATE AND CITY SALES TAX EXEMPTION CERTIFICATE: The State of Texas claims an exemption from taxes under Texas Tax Code § 151.309(4), for purchase of tangible personal property described in this numbered order, purchased from contractor and/or shipper listed here, as this property is being secured for the exclusive use of the State of Texas.
82292
         Contractor
 VID#: 1-75-186-9635-0  COMP
 JESSE P TAYLOR OIL COMPANY
 3701 N SYLVANIA
 FORT WORTH TX 76137

                      **** ENTERED BY SAMUEL FRANCIS   ****
              CONTACT AT AGENCY: DAVID ESCAMILLIA, PHONE: 512 465-7312
              VENDOR CONTACT: JAMES TAYLOR, PHONE: 817 831-0601

                   Description                                  Quantity  Unit      Unit    Extended
                                                                                   Price      Amount

      405-50  GREASE #2-EP:  *****TX DOT GEN WAREHOUSE, ATHENS,
              TX***** THIS GREASE SHALL BE A LITHIUM BASE
              NLGI GC-LB #2 GRADE GREASE WHICH SHALL
              SATISFACTORILY LUBRICATE CHASSIS COMPONENTS,
              UNIVERSAL JOINTS, AND WHEEL BEARINGS OVER
              PROLONGED RE-LUBRICATION INTERVALS AND OVER A
              WIDE TEMPERATURE RANGE.  THE GREASE SHALL
              RESIST OXIDATION, EVAPORATION,
              AND CONSISTENCY DETERIORATION WHILE GIVING
              PROTECTION FROM CORROSION AND WEAR.  AS A
              MINIMUM, THE GREASE SHALL COMPLY TO THE
              FOLLOWING REQUIREMENTS:
               1. GREASE SHALL COMPLY WITH ASTM D 1264 AND
                  SHALL YIELD WATER WASHOUT TEST RESULTS OF 5
                  PERCENT OR LESS.
               2. PENETRATION WORKED (60 STROKES) SHALL BE
                  BETWEEN 265-295 MM.
               3. TIMKEN OK LOAD TEST SHALL YIELD A MINIMUM 45
                  POUNDS (20 KG.)
               4. DROPPING POINT SHALL BE A MINIMUM 347 DEGREES
                  FARENHEIT (175 CELSIUS)

     25225-4  120 LB CONTAINER, FINA MARSON LIPLEX                     5  CNTR    195.48      977.40

              AGENCY REFERENCE NUMBER: DHT# 147845

               THE  TEXAS  HAZARD  COMMUNICATION  ACT  (ARTICLE 5182B, VTCS)
               REQUIRES  CHEMICAL  MANUFACTURERS AND DISTRIBUTORS TO PROVIDE
               MATERIAL SAFETY DATA SHEETS  (MSDS'S) FOR HAZARDOUS MATERIALS
               SOLD.   PRODUCTS COVERED BY THIS ACT MUST BE ACCOMPANIED BY A
               MATERIAL SAFETY DATA SHEET AND SUCH PRODUCTS MUST BE LABELLED
               IN COMPLIANCE WITH THE LAW.

              DELIVERY IN  14 DAYS.

                                                                   TOTAL THIS ORDER          $977.40